Initial commit

{\rtf1\ansi\ansicpg1252\cocoartf1038\cocoasubrtf350

{\fonttbl\f0\fswiss\fcharset0 Helvetica;}

{\colortbl;\red255\green255\blue255;}

\margl1440\margr1440\vieww9000\viewh8400\viewkind0

\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural

\f0\fs24 \cf0 No work files for this lesson...}

 No newline at end of file

*[1]Sample Project - Schematics and Panel Layout

+[1]C:/users/public/documents/autodesk/acade longbow beta/Libs/jic125/;C:/users/public/documents/autodesk/acade longbow beta/Libs/jic125/1-/;C:/users/public/documents/autodesk/acade longbow beta/Libs/pneu_iso125/;C:/users/public/documents/autodesk/acade longbow beta/Libs/hyd_iso125/;C:/users/public/documents/autodesk/acade longbow beta/Libs/pid/

+[2]ACE_JIC_MENU.DAT

+[3]C:/users/public/documents/autodesk/acade longbow beta/Libs/panel/

+[4]ACE_PANEL_MENU.DAT

+[5]1

+[6]0

+[7]

+[8]0

+[9]1,2,3

+[10]0

+[11]1

+[12]0

+[13]0

+[14]0

+[15]0

+[16]

+[17]

+[18]0

+[19]0

+[20]

+[21]0

+[22]

+[23]0

+[24]

+[25]1

+[26](0.00000 0.03125 0.00000 )

+[27]

+[28]0

+[29]0

+[30]0.000000

?[0]H

?[1]1

?[2]R

?[3]1

?[4],A,B,C,D,E,F,G,H,J

?[5]%F%N

?[6]R

?[7]1

?[8],A,B,C,D,E,F,G,H,J,K,L,M,N

?[9]%N

?[10]1

?[11]0.75

?[12]4.5

?[14]%N

?[15]1

?[16]0

?[17]0.5

?[18]

?[19]

?[20]2.0

?[21]2.0

?[22]A

?[23]1

?[24]1

?[25]-

?[26]WIRES

?[27]WIRENO

?[28]WIRECOPY

?[29]WIREFIXED

?[30]1.0

?[31]1.0

?[32]TAGS

?[33]XREF

?[34]DESC

?[35]TERMS

?[36]XREFCHILD

?[37]DESCCHILD

?[38]LOC

?[39]POS

?[40]MISC

?[41]0

?[42]1

?[43]1

?[44]LINK

?[45]SYMS

?[47]%N

?[48]TAGFIXED

?[49]1

?[50]0

?[51]

?[52]

?[53]

?[54]WIREREF

?[55]

?[56]_MULTI_WIRE

?[57]1

?[58]LOCBOX

?[59]

?[60]0

?[61]0

?[62]0

?[63]

?[64]0

?[65],

?[66]1

?[67]0

?[68]NO,NC,NONC

?[69]Standard

?[70]%T

?[71]1,2,3,5

?[72]W1,T1,TYPE,T2,W2,REF,SH,SHDWGNAM,FILENAME,FULLFILENAME

?[73]MC,MC,MC,MC,MC,MC,MC,MC,L,L

?[74]0.0

?[75]1

?[76]0.000000,0.031250,0.000000

=AB001

===Flow and Interconnection diagram, I/O list

=====SUB=SCHEMATIC

demo01.dwg

===3-phase motor control, Control circuit

=====SUB=SCHEMATIC

demo02.dwg

===Power supplies, I/O module feeds

=====SUB=SCHEMATIC

demo03.dwg

===Control schematic

=====SUB=SCHEMATIC

demo04.dwg

===PLC I/O - Inputs - Slot 1

=====SUB=SCHEMATIC

demo05.dwg

=====SUB=SCHEMATIC

demo10.dwg

=====SUB=SCHEMATIC

demo11.dwg

=====SUB=SCHEMATIC

demo12.dwg

===ACADE Blank Drawing

=====SUB=SCHEMATIC

demo20.dwg

=====SUB=SCHEMATIC

demo25.dwg

===PLC I/O - Inputs - Slots 3, 4

=====SUB=SCHEMATIC2

demo06.dwg

===PLC I/O - Input Slot 5, Output Slot 6

=====SUB=SCHEMATIC2

demo07.dwg

===Operator Station layout

=====SUB=PANEL

demo08.dwg

===Main Control Panel layout

=====SUB=PANEL

demo09.dwg

;; *** Defines title block attribute "mapping" info ***

;;

;; The name of this file can either match the current project

;; "wdp" file name (but with a ".wdt" extension) or be named

;; "default.wdt" (which WD uses if a project-specific one is not

;; found).

;;

;; The name of the existing drawing's title block BLOCK is given

;; below in this format: BLOCK = <block name>. For example, if

;; your standard title block block name is "TITLE" then the

;; entry below would be  BLOCK = TITLE. If your title block consists

;; of multiple blocks, let's say a title block and a revision block,

;; encode the "BLOCK = " line listing all blocks separated by commas.

;; For example, if there are two blocks, TITLEBLK and REVBLOCK, then

;; encode the line as "BLOCK = TITLEBLK,REVBLOCK". If you have multiple

;; sizes such as TITLE-A, TITLE-B, TITLE-D and all have the same

;; basic target attributes, encode the line with a wild-card

;; "BLOCK = TITLE-*" so that it always finds the title block, no matter

;; what "size" is used on the drawing.

;;

;; ***  Title block blockname format: BLOCK = <block name>  ****

BLOCK = TB

TITLE1 = LINE1

DWG_NO = DWGNAM

SHEET = SHEET

TOTAL = SHEETMAX

TITLE2 = DWGDESC

BLOCK = TITLE-D

TITLE1 = LINE2

TITLE2 = LINE3

TITLE3 = LINE4

TITLE4 = LINE5

DWG_NO = DWGNAM

SHEET = SHEET

TITLE5 = DWGDESC

;; ***

;;

;; Attributes on title block are "mapped" to WD project data lines

;; and several WD "CONFIG" values. The form of each mapping line below

;; is either <TitleBlock attr name> = LINEx

;;   where "x" = WD project data line number (LINE1 thru LINE24)

;; or <TitleBlock attr name> = xx    where "xx" can be any of these:

;;   = SHEET for WD CONFIG's sheet value (the %S value)

;;   = SHEETMAX for count of dwgs in the current project (ex: the "N"

;;       value in title block "SHEET x of N")

;;   = DWGNAM for the drawing name value (the %D value)

;;   = IEC_P or IEC_I or IEC_L for the drawing-wide IEC defaults (the %P,%I,%L values)

;;   = DWGDESC for the one-line description text for each drawing that

;;       can be displayed in WD's PROJ drawing list dialog

;;   = DWGSEC for optional "Sec" code entered on PROJ drawing list dialog

;;   = DWGSUB for optional "Sec/Sub" code entered on PROJ drawing list dialog

;;   = FILENAME for ".dwg" filename without path or extension

;;   = FULLFILENAME for full path/filename

;;   = FILENAMEEXT for ACAD file name + ext

;;   = PLOTTIME for plot time stamp (24hr military format)

;;   = PLOTTIME12 for plot time stamp (12-hour am/pm format)

;;   = PLOTDATE for plot date stamp (MM:DD:YYYY format)

;;   = PLOTDATEMMDDYY for plot date stamp (MM:DD:YY format)

;;   = PLOTDATEYYMMDD for plot date stamp (YY:MM:DD format)

;;   = PLOTDATEYYYYMMDD for plot date stamp (YYYY:MM:DD format)

;;

;;   This "xx" value can also be any fixed text within quotes,

;;   ex. DRAWNBY = "Joe Engineer"

;; Note: if the title block's target attribute tag name contains one

;;   or more "wild card characters" (they are: # @ . * ? ~ [ ] - )

;;   then the name MUST be preceeded by a backwards apostophy char `

;;   Example:  `[REV] = LINE5  (where title blk attrib name is "[REV]")

;;

;; *** Attribute / WD mapping -- format: ATTRIBNAME = <WD data line> ***

LINE1=Title 1:

LINE2=Title 2:

LINE3=Title 3:

LINE4=Job Number:

LINE5=Date:

LINE6=Engineer:

LINE7=Drawn By:

LINE8=Checked By:

LINE9=Scale: